Cast Iron ODP NEMA Premium

Cast Iron ODP NEMA Premium

Open Drip Proof[DHP]
AEHHXV/AEHHXU, NEMA PREMIUM [XP]
AEHHXG/AEHHXF, NEMA PREMIUM, FOOTED C-FACE (1 HP – 100 HP)[XP_C]
AEUHXG/AEUHXF, NEMA PREMIUM, ROUND BODY C-FACE (1 HP – 75 HP)[XPV_C]

HP1 HP through 800 HP
Speed3600, 1800, 1200 RPM
Voltage230/460V (usable on 208V)
Frequency60 Hz
Inquire Now
Cast Iron ODP NEMA Premium

Notes:

Fire Pump available. See product page for more details.
(1) Available in 575V. TWMC carries minimal 575V stock; please check availability to ensure required motors are in stock.
Ratings may be available from our Canadian warehouses and/or our factory. Pricing and leadtime may vary.
(2) Consult a Stock Product Application Specialist for suitability in higher ambient environments.
(3) Consult a Stock Product Application Specialist for suitability in higher elevations.
(4) Motor service factor is 1.0 when operated on a VFD.
(5) Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1, Part 31.

Features
  • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame and End Brackets
  • Rolled Steel Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted
  • Designed for 40˚C Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • 1045 Carbon Steel Shaft
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray – Munsell N5.0
  • Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T – 280T (Non-regreasable)
  • High Quality Ball (or Roller) Bearings regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
  • Labyrinth Type Metal Flinger on Both Ends for F# 280TS and Larger
  • Cast Iron Inner and Outer Bearing Caps for F#280TS and Larger
  • Stainless Steel Nameplate
  • New Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1.4.4.2, Part 31
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 9 Leads for 5 HP and Smaller;
  • 12 Leads for 7.5 HP to 125 HP;
  • 6 Leads for 150 HP and Larger
  • Motors are U.L. Recognized, CSA Approved and CE Marked
Applications

Fans & Blowers , Pumps, HVAC Equipment, Fire Pumps*, Compressors